How to use fully automatic embossing machine reasonably? Today, the relevant technical personnel of Xuzhou Tenglong Machinery Co., Ltd. will give you a detailed introduction on how to use the fully automatic embossing machine.
1. Automatic control of feeding cotton
The principle of automatic control of cotton feeding is: feedback the ginning current to the microcomputer in a timely manner through the density of the seed cotton roll, and after a series of data processing, the voltage signal is sent to the frequency converter, and the speed of the feeding motor is controlled by the frequency conversion. Feed the amount of flowers. The density of the seed cotton roll is large, and the pressure on the sawtooth is also great. At the same time, the fiber content in the seed cotton roll increases, thus increasing the hook pulling force of the sawtooth on the seed cotton roll, which speeds up the movement of the seed cotton roll, which is beneficial to increase the output. However, when the lap density is too high, its movement resistance will greatly increase, which will hinder the operation of the lap, which is not conducive to increasing the output.
2, the protrusion of the saw blade in the work box
Saw blade protrusion is the length of the saw blade measured from the working point of the embossed rib along the arc surface of the rib 100mm down, perpendicular to the arc surface of the rib. In the embossing process of the fully automatic embossing machine, the protrusion of the saw blade directly affects the output of the embossing. Generally speaking, by increasing the extension of the saw blade, the effective number of working teeth of the saw blade in the working box will increase, and the ability of the saw blade to hook and pull fibers will be enhanced, which helps to increase the output.
3, prevent severe friction
During the processing of seed cotton, due to the friction between the movement of the seed cotton and lint and the processing equipment, ropes and neps are often formed. The part that is prone to cords and neps is the working box of the saw-tooth gin. Therefore, we should check and repair frequently to ensure the smoothness of saw blades (including saw teeth), ribs and cotton roll boxes.
Post time: Nov-15-2021